MAS-W60

Outswing window system
MAS W60 is an engineered 2 ½” deep window system which utilises a variety of common
components throughout its range. The primary system offers several levels of security, including low level blast resistance and two
levels of thermal performance. The system may be used independantly or incorporated into our existing MAS F50 curtain walling system for both high and low rise facades.

DESIGN PROFILE
Materials:
Aluminium profiles are extruded from 6063 aluminium alloy, temper T6.
The aluminium profiles are assembled with a polyamide isolator. A range of glass thicknesses can easily be accomodated with the various glazing beads and EPDM gaskets.

Construction:
For efficient and simple construction the profiles have been kept to a minimum and designed around common components. The revolutionary hardware allows rapid assembly, is robust and smooth to operate. Hinges are available as either visible or concealed.

Finishes:
The MAS W60 system is offered in the following range of finishes:
  • Powder coated. (Guarantees can be offered, if requested).
  • Anodized.

    • We offer two outswing window systems, with common outer frame / casement  available:

    • Sash frame for economy hardware which includes 4 bar hinges and 1 side locking mechanism.
    • Sash frame for more robust hardware which includes barrel hinges and 3 side locking mechanism.
    • As with inswing system the outswing system can be integrated in to curtain wall or punched openings.





     

     

    MAS-W60 OUTSWING WINDOW DESIGN SPECIFICATIONS:

    DESIGN PERFORMANCE
    United Kingdom:
    This window system underwent a full test in May 2008, as laid down by the CWCT standard.

    Air Permeability
    Tested to 600 Pa under CWCT

    Static Water Tightness
    Tested to 600 Pa under CWCT

    Wind Resistance
    Tested to 1500 Pa under CWCT




    United States of America:
    This window system underwent a full test in December 2007 as laid down by the AAMA regulations The system is designated as AW7
  • AW75 windows according to AAMA /WDMA/CSA 101/I.S.2/A440-05

    • Air Permeability
  • Tested to 300 Pa (ASTM E283 and ASTM E2
    • Static Water Tightness
  • Tested to 718 Pa (ASTM E331 and ASTM E5
    • Life Cycle
  • Tested under AAMA 910
    • Load Deflection
  • Tested to 3590 Pa (ASTM E330)
    • Load Structural
  • Tested to 5390 Pa (ASTM E330)
    • Forced Entry
  • Tested to Grade 10 (ASTM F588)

    • Full test report details are available on request.

    Authorities
    BS EN 755-9: 2001. Aluminium and aluminium alloys. Extruded rod / bar, tube and profiles. Profiles, tolerances on dimension and form.
    BS 6496: 1984. Specification for powder organ coatings to aluminium alloys for external architectural purposes.
    BS 3987: 1991. Anodic oxide coatings on wrought aluminium for external architectural purposes.
    CWCT. Standard Test Methods for Building Envelopes 2005.
    AAMA/WDMA/CSA101.I.S.2/A440-05. Standa for windows, doors and unit skylights. (USA)


    Back Back to Architectural Products Page